Novastar A5s Plus Receiving Card

DescriptionThe A5s Plus is a small receiving unit that works with LED panels that need to show pictures consistently and handle signals reliably. A single device can handle up to 512×384@60Hz, which means that conventional display setups will always look good. The construction has densely packed connectors that assist keep dust and vibration from getting in the way. This makes it good for areas where reliability is important.Multiple internal processing functions greatly improve the quality of the image. It has color range switching to make it more accurate, better handling of grayscale using 18bit processing, and pixel-level brightness and chroma correction that makes the whole screen look better by making sure there are no discrepancies. Separate tuning for red, green, and blue gamma helps fix color imbalances and make low-brightness scenes look better, especially in bad lighting.Built-in monitoring and backup systems also make operations more stable and easier to keep up. The display will keep working even when there are problems thanks to features like dual-card redundancy, loop prevention, and parameter duplication. Automatic calibration and quick data upload make setup and maintenance much easier. Smart module support lets you keep track of temperature, voltage, and runtime.Input Ports2 data ports for Gigabit EthernetOne LCD control interface1 piece of test button inputSeveral allocated pins for custom expansionOutput Ports32 groupings of RGB signal output that are the same64 groups of serial data transfer (may be expanded to 128 groups)Support for LVDS-based signal output (depends on firmware)Video Input FeaturesMaximum loading: 512×384 at 60HzWorks with high grayscale rendering modesWhen used with a compatible sender, it can show 3D signals.Main FeaturesControl over the color gamut in real time18-bit grayscale improvement for smoother changesCalibration of color and brightness at the pixel levelIndependent tweaking of RGB gammaImage rotation in 90-degree steps (0°, 90°, 180°, and 270°)Tool for fixing dark and bright linesLatency performance for one frame (conditions apply)Smart module monitoring (errors, voltage, and temperature)Automatic upload of calibration data from module memoryMapping display for finding connectionsCustomize the startup image and the signal loss screenMonitoring the quality of Ethernet connectivityFinding two power suppliesReading back firmware and configurationSpecifications for electricityThe operating voltage is DC 3.3V–5.5V.Normal current draw is 0.6A.Power use: 3.0WThe environment in which it worksThe temperature can be anywhere from -20°C to 70°C.No condensation, humidity range: 10%–90% RHWhere to storeThe temperature range is from -25°C to 125°C.Humidity range: 0% to 95% RH, no water dropletsSpecifications for the bodySize: 4.5 cm × 7.0 cm × 0.8 cmWeight: 0.0162 kgDetails about packing80 pieces in each box, each product packed in blister wrappingThe size of the box is 37.8 cm × 19.0 cm × 12.0 cm.Accessories that come with itGetting cards (depending on how many packages you have)